Cutek® CD50 is available in 18 different colourtones that are formulated to enhance the natural character and beauty of wood without obscuring the grain.
Click here to view colourtone recommendations for natural presentation of commonly used timber species.
Please contact Chemisys if you require custom manufactured colour-tones or free test pots to determine colour suitability.
Click images below to enlarge.
Autumntone  |
Blackash  |
Blondetone  |
Browntone  |
Burnt Red  |
Cedartone  |
Chestnut  |
Clear  |
Cornish Gold  |
Cypress  |
Goldtone  |
Greenstone  |
Grey Mist  |
Rustic Gold  |
Sela Brown  |
Smokey Grey  |
Walnut  |
New Bronzetone  |
Weathered Clear  |
Please note that all colour samples here are shown on Western Red Cedar
Exterior timbers coated with Clear Cutek® CD50 will silver with age.(Click on Weathered Clear CD50 Sample above to view)
Specially formulated colour-tones may be obtained to mix with clear Cutek® CD50 to maintain the natural timber colour character, delay silvering, and retain the "freshly oiled look" for longer. When selecting from the range of colour-tones allow for the timber colour to naturally lighten during the first three to eight months after application, as natural weathering and leaching occurs. Retention of colour is more durable on rusticated, or band sawn timbers, and may be maximised by including the colour-tone in all applications of Cutek® CD50. If colour-toned Cutek® CD50 has faded over time, wash timbers with SARA Clean and apply a single coat of colour-toned Cutek® CD50 to restore the original look of the protected timber.